COVID-19 Update - This is to inform you that the Government of India has announced a complete lockdown in India 22nd March 2020 to 3rd May 2020. As a result, our offices will now be closed till 3rd May 2020 and all our employees will be working from home. Office telephones will not be answered, and therefore you are requested to direct all your queries related to manuscript submission, review process, publication etc. at below mentioned details.,, Mob. 8826373757, 8826859373, 9910947804

IP Indian Journal of Conservative and Endodontics

An in-vitro evaluation of effect of three finishing and polishing systems on the surface of nanofilled composite resin

Full Text PDF

Author Details: Sarita Singh, Jyoti Mandlik, Kalpana Kanyal, Abhijit Jadhav, Aishwarya Handa

Volume : 1

Issue : 2

Online ISSN : 2581-8988

Print ISSN : 2581-9534

Article First Page : 37

Article End Page : 41


Background: The aims of this study were to evaluate the effectiveness of three finishing and polishing systems on the surface of nanofilled composite, and to evaluate the effect of the surface sealant application (prime & bond) on the surface roughness after finishing and polishing procedures of tested composite.
Material and Method: A total of 30 composite discs of dimension 6 x 3 mm (6mm in diameter x 3mm in thickness) were made using a custom made stainless steel mould and then randomly divided into 3 subgroups for finishing and polishing by three different methods; Sof-Lex, Shofu and Mylar strip. The average surface roughness (Ra, µm) of all specimens was measured with a profilometer. A surface sealant was then applied to all the treated specimens, according to manufacturer’s instructions and the average roughness was measured again.
Result: Statistically significant difference was observed in surface roughness values before and after sealant application when finished and polished with shofu system. The lowest roughness values, before and after sealant application, was obtained when cured under a Mylar strip and the highest values were obtained when treated with Shofu.
Conclusion: The Mylar strips gave lowest Ra values followed by Sof-Lex followed by Shofu and the surface sealant improved the surface texture of tested specimens drastically.

Nanofilled composite; Mylar strips; Sof-Lex and Shofu finishing and polishing system

Doi No:-10.18231